FW 190

$39 + S&H  

International orders will incur additional shipping based on USPS rates and location. 

Note: kits now include spars and ready cut spar slots in the wings

Instruction set - see how to put it together...

Check out our "COMBO" deal for $143 that includes a .25 size engine and necessary equipment

The plane on the right is the latest of our personal stock. This one is done in tan tape and painted with brown and green Krylon and the under belly and bottom of wings are in gray. We also used the coroplast fuselage doublers for the cowl. 

The FW 190 is a very small plane and, with the right motor, very fast. Handling and maneuverability is incredible. This example exhibits no bad characteristics and glide is very smooth with no tip stall.

This is the plain cowled version of the FW190 using the fuselage doublers as the engine cowling, not the coolest looking but know what!?! it works great,  easy to setup, and makes engine maintenance a snap.

This plane has flown many flights now including a combat where she captured three ribbons right off the bat! This one is fairly fast with a converted .21 marine engine. The new Norvel .25 plain or ball bearing engine would be perfect for this and any of our planes because they are proving to be tough and very competitive on the combat scene. I have one in our new Mig 3 and I can tell you that it is the fastest plane I've flown! BTW, we keep both these engines in stock along with tanks, mounts and radio systems. We recently put in stock a specially setup Hitec radio system that includes micro 555 receiver and HS 81 servos and a 350 mah battery pack that is just perfect for combat planes due to the light weight. Check them out from the Gas engine tab and the Electronics tab for the radio system 

List of recommended parts to finish the kit - click here. or go down the page to view the COMBO deal!

Specs

Length: 28"

Span: 35"

Chord: tapered, root 8.5", tip 5.5"

foil: E205

Weight: 2105 Combat , 40oz with .21 power and some micro servos

Wing Loading: 2105 Combat version 23.5 oz/sq ft

Power: .20 to .40 and geared cobalt electric

Radio: micro to full size 3 ch.

This is a parts layout of the kit. Each kit includes a roll of colored tape, control horns, and piano wire for pushrods. As you can see, they are very simple and easy to assemble. All the foam is CNC hot wire cut. The fuselage doublers and tails are die-cut. You can sand the fuselage to a scale shape or leave it blocky if you want. With a little sculpting, you will end up with a very nice looking plane - but then that isn't the goal. The goal is to have maximum fun at minimum cost with un believable durability.