Micro Sniper Sloper $30 + S&HInternational orders will incur additional shipping based on USPS rates and location. | |
|
You can view the instruction set from this link or the Tech Instruction tab above. The Micro Sniper is designed as a simple little slope racer that that is suited to rough terrain, low to high wind and extreme flying. The Micro Sniper has been flown in 50mph winds that have grounded all other planes and is ideal for 15 to 30mph wind. The corrugated plastic fuselage doublers make the front of the plane almost indestructible and the smooth design makes the Sniper very fast. Specs: Span: 40 to 47 inches Area: 290 to 352sq in Weight: about 14oz - depends on the radio gear used
| |
The Micro Sniper has a 47 inch wing that can be trimmed down to 40" or so and a very thin SD7030 airfoil. At $30 bucks, it will pack a lot of fun for not much money!]
| |
This is the parts layout of the kit. It comes with 1 roll of colored packing tape, control horns and pushrod wire. Minimal parts and easy assembly make this kit one of the fastest kits to build on the market. You can leave the fuselage as is or sand it a little for a smooth and cool look. | |
JK Aerotech Contact info: Address: 27542 SE Hwy 212, Boring OR 97009 Phone: 503-663-4081 E-mail: jkaerotech@verizon.net
Place an order using JKAerotech's MCart link below - 24 hrs a day! We accept checks (with 21 day holds), MasterCard and Visa. We are not set up to accept American Express, Discover or C.O.D. orders
| |